FeOOH@Metal–Organic Framework Core–Satellite Nanocomposites for the Serum Metabolic Fingerprinting of Gynecological Cancers

High-throughput metabolic analysis is of significance in diagnostics, while tedious sample pretreatment has largely hindered its clinic application. Herein, we designed FeOOH@ZIF-8 composites with enhanced ionization efficiency and size-exclusion effect for laser desorption/ionization mass spectrometry (LDI-MS)-based metabolic diagnosis of gynecological cancers. The FeOOH@ZIF-8-assisted LDI-MS achieved rapid, sensitive, and selective metabolic fingerprints of the native serum without any enrichment or purification. Further analysis of extracted serum metabolic fingerprints successfully discriminated patients with gynecological cancers (GCs) from healthy controls and also differentiated three major subtypes of GCs. Given the low cost, high-throughput, and easy operation, our approach brings a new dimension to disease analysis and classification.     

Electrochemical sensor based on super-magnetic metal–organic framework@molecularly imprinted polymer for Sarcosine detection in urine

Accurate determination of Sarcosine (SAR) in urine with high sensitivity and selectivity is important, because it was recently recommended as a prospective biomarker for prostate cancer (PCa) and significant for the early identification of PCa. In this study, an electrochemical sensor based on Fe₃O₄ incorporated metal–organic frameworks (MOFs) @molecularly imprinted polymer (MIP) was constructed for SAR detection. Magnetic Fe₃O₄ nanoparticles embedded zeolitic imidazolate framework-8 (ZIF-8) was used as the support of MIP. MIP provides specific recognition sites for template molecules SAR and MOFs increase the rate of mass transfer and adsorption capacity due to the porous structure. The synthesized super-magnetic Fe₃O₄@ZIF-8@MIP was self-assembled onto an Au electrode in magnetic field and used as the sensing unit of electrochemical sensor. Cyclic voltammetry was used to monitor the electrochemical behavior, and the binding of SAR resulted in a reduction in the measured current. The results revealed a wide linear range from 1 to 100 pM towards trace SAR determination, with extremely low limit of detection down to 0.4 pM. In conclusion, the Fe₃O₄@ZIF-8@MIP based sensor provides a selective, sensitive, and convenient method for SAR diagnosis and other cancer marker detection.     

Computational Study on the Charge Transport and Optical Spectra of Anthracene Derivatives in Aggregates

A recent experiment [Angew. Chem. Int. Ed. 2017 , 56, 722–727] found that a (1 : 9) blend film of two anthracene derivatives, 2-fluorenyl-2-anthracene ( FlAnt ) and 2-anthryl-2-anthracence ( 2 A ), exhibit both efficient white light emission and high hole mobility, thus promising for organic light-emitting transistors (OLETs). Employing quantum chemistry at the polarizable continuum model (PCM) and the quantum mechanics/molecular mechanics (QM/MM) levels, we investigated the excited-state structures, optical spectra, band structure and the carrier mobility for FlAnt and 2 A from solution to aggregate phases. We suggest using the ratio of intermolecular excitonic coupling J and intramolecular excited state relaxation energy E to judge the bathochromic shift in optical emission in aggregates. For FlAnt , ρ=J/E is calculated to be less than 0.17, a critical value we identified earlier, and the spectra in solution and aggregate phases present quite similar features (blue emission). However, ρ is ∼0.5 for 2 A systems, and the calculated emission in the aggregate phase exhibits a remarkable bathochromic shift. In addition, the 0–0 emission is strongly suppressed in the herringbone stacking. These observations justify the experimental findings that (i) 2 A is blue emissive in solution but yellow-green in the aggregate phase, whereas FlAnt is always blue, and (ii) the blend of them show white emission. By using the “quantum nuclear tunneling” model we proposed earlier, we found the hole mobility for FlAnt and 2 A are 0.5 and 4.2 cm² V⁻¹ s⁻¹, respectively, indicating both are good hole transport materials.     

Enhanced headspace single drop microextraction method using deep eutectic solvent based magnetic bucky gels: Application to the determination of volatile aromatic hydrocarbons in water and urine samples

A facile headspace single drop microextraction method was developed using deep eutectic solvent‐based magnetic bucky gel as the extraction solvent for the first time. The hydrophobic magnetic bucky gel was formed by combining choline chloride/chlorophenol deep eutectic solvent and magnetic multiwalled carbon nanotube nanocomposite. Magnetic susceptibility, high viscosity, high sorbing ability, and tunable extractability of organic analytes are the desirable advantages of the prepared gel. Using a rod magnet as a suspensor in combination with the magnetic susceptibility of the prepared gel resulted in a highly stable droplet. This stable droplet eliminated the possibility of drop dislodgement. The prepared droplet made it possible to complete the extraction process in high temperatures and elevated agitation rates. Furthermore, using larger micro‐droplet volumes without any operational problems became possible. These facts resulted in shorter sample preparation time, higher sensitivity of the method, and lower detection limits. Under the optimized conditions, an enrichment factor of 520–587, limit of detection of 0.05–0.90 ng/mL, and linearity range of 0.2–2000 ng/mL (coefficient of determination = 0.9982–0.9995) were obtained. Relative standard deviations were < 10%. This method was successfully coupled with gas chromatography and used for the determination of benzene, toluene, ethylbenzene, and xylene isomers as harmful volatile organic compounds in water and urine samples.     

The kinetics of solid-phase microextraction measured for freshly added and aged hydrophobic compounds in two different soils

The proper choice of exposure times is critical if the freely dissolved concentration of chemicals in soil porewater is to be measured via the equilibrium solid-phase microextraction (SPME) as the times to equilibrium may vary depending on compound and soil properties. To reveal the effects of compound hydrophobicity, ageing and soil organic matter content on times to equilibrium, the SPME uptake was measured for five freshly added and aged hydrophobic organic compounds (phenanthrene, pyrene, lindane, p,p′-DDT and polychlorinated biphenyl (PCB) 153) in two contrasted soils (arable and forest soil). The tested compound-soil systems behaved kinetically different. Longer equilibrium times were observed with increasing hydrophobicity of compounds for aged compared to freshly added chemicals and for the forest soil in comparison to the arable soil. The calculated soil–porewater partition coefficients (i.e. sorption coefficients, K_d) of chemicals differed between soil types mainly due to various organic carbon (OC) contents as evidenced by the comparable K_oc values (i.e. K_d values normalised to soil OC content). Similar K_oc values were also found with the various extent of ageing, indicating that both the freshly added and aged compounds linearly partitioned between the soil organic matter and porewater. Our results suggest that, for a respective compound, variations in equilibrium times may be expected depending upon the residence time and the organic matter content in soil where the longest equilibrium times seems to appear for a combination of aged compounds and high organic soils. With regard to this outcome, the effect of the level of sample depletion due to the SPME extraction (LD_SPME) on equilibrium times was assessed. At LDs_SPME of up to 10%, equilibrium times increases linearly with LDs_SPME for p,p′-DDT and PCB 153. For phenanthrene (LD_SPME<10%), and for lindane and pyrene (1.2% < LD_SPME > 40%), no clear relationships were observed.     

Postsynthetic Metal and Ligand Exchange in MFU‐4l: A Screening Approach toward Functional Metal–Organic Frameworks Comprising Single‐Site Active Centers

The isomorphous partial substitution of Zn²⁺ ions in the secondary building unit (SBU) of MFU‐4l leads to frameworks with the general formula [M_xZn_(5–x)Cl₄(BTDD)₃], in which x≈2, M=Mn^II, Fe^II, Co^II, Ni^II, or Cu^II, and BTDD=bis(1,2,3‐triazolato‐[4,5‐b],[4′,5′‐i])dibenzo‐[1,4]‐dioxin. Subsequent exchange of chloride ligands by nitrite, nitrate, triflate, azide, isocyanate, formate, acetate, or fluoride leads to a variety of MFU‐4l derivatives, which have been characterized by using XRPD, EDX, IR, UV/Vis‐NIR, TGA, and gas sorption measurements. Several MFU‐4l derivatives show high catalytic activity in a liquid‐phase oxidation of ethylbenzene to acetophenone with air under mild conditions, among which Co‐ and Cu derivatives with chloride side‐ligands are the most active catalysts. Upon thermal treatment, several side‐ligands can be transformed selectively into reactive intermediates without destroying the framework. Thus, at 300 °C, Co^II‐azide units in the SBU of Co‐MFU‐4l are converted into Co^II‐isocyanate under continuous CO gas flow, involving the formation of a nitrene intermediate. The reaction of Cu^II‐fluoride units with H₂ at 240 °C leads to Cu^I and proceeds through the heterolytic cleavage of the H₂ molecule.     

Solubility and Crystallizability: Facile Access to Functionalized π‐Conjugated Compounds with Chlorendylimide Protecting Groups

Functional π‐conjugated molecules are relevant for the preparation of new organic electronic materials with improved performance. However, their synthesis is often rendered difficult by their inherently low solubility, and the permanent attachment of solubilizing groups may change the properties of the material. Here, we introduced the chlorendylimidyl moiety as a new temporary protecting group for the straightforward large‐scale synthesis of protected quarter‐, sexi‐, octathiophene, and perylene bisimide diamine and dicarboxylic acid derivatives. The obtained chlorendylimides and chlorendylimidyl active esters were highly soluble in organic solvents, and optical spectroscopy confirmed the low tendency of the compounds to aggregate in solution. At the same time, they could be conveniently purified by recrystallization or precipitation. Single‐crystal X‐ray structures obtained for most compounds showed supramolecular motifs highlighting the role of the rigid, polychlorinated chlorendyl moieties in their crystallization. The obtained protected diamine and dicarboxylic acid derivatives were easily deprotected and converted into various amide‐substituted oligothiophenes and perylene bisimides that are of interest as new functional materials for organic electronic thin film or nanowire devices.     

Interplay of Hole Transfer and Host–Guest Interaction in a Molecular Dyad and Triad: Ensemble and Single‐Molecule Spectroscopy and Sensing Applications

A new molecular dyad consisting of a Cy5 chromophore and ferrocene (Fc) and a triad consisting of Cy5, Fc, and β‐cyclodextrin (CD) are synthesized and their photophysical properties investigated at both the ensemble and single‐molecule levels. Hole transfer efficiency from Cy5 to Fc in the dyad is reduced upon addition of CD. This is due to an increase in the Cy5‐Fc separation (r) when the Fc is encapsulated in the macrocyclic host. On the other hand, the triad adopts either a Fc‐CD inclusion complex conformation in which hole transfer quenching of the Cy5 by Fc is minimal or a quasi‐static conformation with short r and rapid charge transfer. Single‐molecule fluorescence measurements reveal that r is lengthened when the triad molecules are deposited on a glass substrate. By combining intramolecular charge transfer and competitive supramolecular interaction, the triad acts as an efficient chemical sensor to detect different bioactive analytes such as amantadine hydrochloride and sodium lithocholate in aqueous solution and synthetic urine.     

Lipase‐Supported Metal–Organic Framework Bioreactor Catalyzes Warfarin Synthesis

A green and sustainable strategy synthesizes clinical medicine warfarin anticoagulant by using lipase‐supported metal–organic framework (MOF) bioreactors (see scheme). These findings may be beneficial for future studies in the industrial production of chemical, pharmaceutical, and agrochemical precursors.     

Enhancing the Water Stability of Al‐MIL‐101‐NH2 via Postsynthetic Modification

The resistance of metal–organic frameworks towards water is a very critical issue concerning their practical use. Recently, it was shown for microporous MOFs that the water stability could be increased by introducing hydrophobic pendant groups. Here, we demonstrate a remarkable stabilisation of the mesoporous MOF Al‐MIL‐101‐NH₂ by postsynthetic modification with phenyl isocyanate. In this process 86 % of the amino groups were converted into phenylurea units. As a consequence, the long‐term stability of Al‐MIL‐101‐URPh in liquid water could be extended beyond a week. In water saturated atmospheres Al‐MIL‐101‐URPh decomposed at least 12‐times slower than the unfunctionalised analogue. To study the underlying processes both materials were characterised by Ar, N₂ and H₂O sorption measurements, powder X‐ray diffraction, thermogravimetric and chemical analysis as well as solid‐state NMR and IR spectroscopy. Postsynthetic modification decreased the BET equivalent surface area from 3363 to 1555 m² g^?1 for Al‐MIL‐101‐URPh and reduced the mean diameters of the mesopores by 0.6 nm without degrading the structure significantly and reducing thermal stability. In spite of similar water uptake capacities, the relative humidity‐dependent uptake of Al‐MIL‐101‐URPh is slowed and occurs at higher relative humidity values. In combination with ¹H‐²⁷Al D ‐HMQC NMR spectroscopy experiments this favours a shielding mechanism of the Al clusters by the pendant phenyl groups and rules out pore blocking.